2K epoxy bonding primer NiN for epoxy mortar wet-on-wet application 0,75 kg | DIPOXY

SKU: HV-NiN-0,75kg
GTIN: 4064944032790
HAN: HV-NiN-0,75kg
Category: Epoxy-resin-primer

Größe

only

15,11 €

20,14 € per 1 kg

incl. 19% VAT , plus

Old price: 15,90 €

Discount: 5%

Available immediately

Description
Reviews

2K epoxy bonding primer NiN for epoxy mortar wet-on-wet application | DIPOXY

Solvent-free two-component epoxy bonding primer for wet-on-wet application with epoxy mortars.

Reliable bond between substrate and epoxy mortar

The primer wets the prepared substrate, binds remaining fine dust and creates a reactive bonding bridge. Epoxy mortar is applied directly to the still-fresh primer without prior drying or curing.

Wet on wetApply epoxy mortar directly to the still-fresh bonding primer.

Substrate bindingHelps bind remaining fine dust on a previously cleaned, sound substrate.

VersatileFor concrete, cement and other sound substrates; test adhesion on non-mineral surfaces first.

Pack size and mixing ratio

Total quantity	Various sizes available
Mixing ratio	2:1 (Component A : Component B) by weight

Application

Prepare a sound, dry substrate free from oil, grease, loose material and coarse dirt.
Combine components A and B completely at a 2:1 ratio by weight.
Mix homogeneously for about 2–3 minutes at 250–500 rpm, scraping the sides and bottom of the container.
Apply the primer evenly and bind remaining fine dust.
Immediately apply the epoxy mortar wet on wet to the still-fresh primer.

Times are indicative and depend on batch size, substrate and ambient conditions. The reaction generates heat; do not leave mixed material unnecessarily in a tall, narrow container.

Indicative times

Temperature	Working time / pot life	Touch dry
10 °C	40–60 min	6–12 h
20 °C	20–40 min	2–4 h
30 °C	10–25 min	1–2 h
Final cure	approx. 1–2 days

Safety and hazard information

Read the label and the safety data sheets for both components in full before use. Wear protective gloves, protective clothing and eye protection. Avoid release to the environment.

Component A

Signal word: Warning
Pictograms: GHS07, GHS09
Transport: UN3082

H302: Harmful if swallowed.
H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H411: Toxic to aquatic life with long lasting effects.
EUH205: Contains epoxy constituents. May produce an allergic reaction.

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection.
P302+P350: IF ON SKIN: Gently wash with plenty of soap and water.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P391: Collect spillage.
P501: Dispose of contents/container in accordance with applicable regulations.

Component B

Signal word: Danger
Pictograms: GHS05, GHS07, GHS09
Transport: UN2735

H302+H332: Harmful if swallowed or if inhaled.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H410: Very toxic to aquatic life with long lasting effects.
EUH071: Corrosive to the respiratory tract.

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P271+P260: Use only outdoors or in a well-ventilated area. Do not breathe dust, fumes, gas, mist, vapours or spray.
P280: Wear protective gloves/protective clothing/eye protection.
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P352: IF ON SKIN: Wash with plenty of water.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310: Immediately call a POISON CENTER/doctor.
P405: Store locked up.
P501: Dispose of contents/container in accordance with applicable regulations.

Item information	Value
Shipping weight:	0,96 kg
Content:	0,75 kg

There are no reviews yet.

Others also bought:

2K epoxy repair mortar for concrete, screed & floors with quartz - repair & patching 1 kg approx. RAL 7023 Concrete grey | DIPOXY

21,90 € *

21,90 € per 1 kg